 |
ElisAqua33 - water tap fixture
 |
ElisAqua 33 is a small and very effective SpringWaterSystem that can be easily installed onto standard water taps.
Within the ElisAqua 33 the water is gently whirled through a hyperbolic glass funnel.
Thereby cluster molecules are dissolved and through the friction of the quartz crystals,
fine currents are added into the water, which have
|
a revitalising effect on the aquatic metabolism.
Handpicked and thoroughly cleaned precious and semi-precious stones help the water "ripen" and transfer natural healing
vibrations onto the water.
Find more information on:
Scope of delivery - ElisAqua 33
|
The following components are included in the delivery:
- ElisAqua 33
- adapter
- precious and semi-precious stones in cloth bag
- pre-whirl-funnel and three-star
- gaskets and reserves
|
Easy to install
You don't need to be a handyman to install the ElisAqua 33. It is really very simple.
This is how you set up your Elisaqua 33:
- Unscrew the adapter and take the O-ring seal off your ElisAqua 33.
- Place the three-star into the glass ball so that it sits snugly in the outlet. This three-star serves as a barrier for the precious stones and harmonises the water on its way out.
- Choose some precious stones and fill the ElisAqua 33 up to a third at most and please hold the ElisAqua 33 upright from now on! - for the three-star to stay in the spout.
- Put the O -ring seal back into the top and fit the whirl funnel into the upper thread hole so that it lies on top of the seal.
- Now place the second enclosed O-ring onto the funnel (standard aerator seal).
- Do you need a thread adapter for your faucet? If not, just screw the ElisAqua carefully onto the faucet by hand
- If you do need an adapter, please use the enclosed aerator seal as well.
A unique copy
|
Each ElisAqua 33 is a unique copy of high quality, manufactured by hand. To help you enjoy it over a long period of time, our master glassblower offers some tips:
"The glass I use for the ball is the borosilicate glass "Simax", for the trident and the funnel I use the borosilicate glass "Duran 50". These kinds of glass are better known as heat resistant glass and are often used for cookware or in laboratories. Compared to common soft glass (lead crystall, soda ash = sheet glass) the borosilicate glass is characterised by a thermal, chemical and mechanical stability of up to three times higher.
|
Borosilicate glass is processed with a flame temperature of over 2000°C. Thus borosilicate glass can be heated from 50°C up to 500°C within a short period of time without a problem, provided that the glass is scratch-free. Therefore: take good care when packing and unpacking the glass parts! And watch out during assembling! When in direct contact, glass pieces can scratch each other and these scratches can often deepen into cracks. Once the ElisAqua is working the water film protects it from being scratched by the rotating stones.
May you enjoy your ElisAqua!"
Bernd Weinmayer
www.weinmayer.com
Prices
Your can find the current prices in our shop here, or download them as a PDF.
|
|
|
